当前位置:国家开放大学(汽车电器设备构造与检修)题库

问题:

[名词解释] 静止电动势

Refer to the exhibit. Given the CPE deployment model, the Enterprise applications shown, and the functions being provided as designated, the appropriate product choice is(). ["Cisco PIX 501 Firewall","Cisco 831 router","Cisco 837 router ","Cisco VPN3002 Hardware Client","Cisco ubr925 cable modem","Cisco SW VPN Client"] 【背景资料】某建筑工程,建筑面积24642㎡,地上10层,地下2层(地下水位-2.0m)。主体结构为非预应力现浇混凝土框架剪力墙结构(柱网为9m*9m,局部柱距为6m),抗震设防烈度7度。梁、柱受力钢筋为HRB335.结构主体地下室外墙采用P8防水混凝土浇筑,墙厚250mm,钢筋净距60mm,混凝土为商品混凝土。一、二层柱混凝土强度等级为C40,以上各层柱为C30。 情形1:施工过程中,施工单位进场的一批水泥经检验其初凝时间不符合要求,另外由于工期要求很紧,地下室外墙施工不得不在气温只有-3℃时进行。 情形2:钢筋过程施工时,发现梁、柱钢筋的接头采用挤压连接,有位于梁、柱端箍筋加密区的情况。在现场留取接头试件样本时,是以同一层每600个为一验收批,并按规定抽取试件样本进行合格性检验。 情形3:结构主体地下室外墙防水混凝土浇筑过程中,现场对粗骨料的最大粒径进行了检测,检测结果为40mm。请根据背景资料完成以下选项。 本工程基础混凝土应优先选用()。 ["矿渣硅酸盐水泥","火山灰硅酸盐水泥","粉煤灰硅酸盐水泥","普通硅酸盐水泥"] 试分析企业价值评估与构成企业的各单项资产的简单评估值加和之间的区别。 Click the Exhibit button. When designing a DWDM system with multiple amplified spans, a pre-amp is needed at Site B to (). (Choose three.) [" offset the OADM loss at site b"," overcome the high multiplexer loss at site a"," amplify signal levels after the high loss through Fiber Span 1"," adjust add channels at site B to be at the same level as the passthrough channels"," ensure that the per channel power is higher than the minimum needed for the post-amp at Site"] 在项目建议书阶段编制的投资估算是控制建设项目投资的依据。 静止电动势
参考答案:

  参考解析

本题暂无解析

相关题目:

在线 客服